Chamber dimensions 400 mm diameter, 750 mm depth
Total/nominal chamber volume 104/95 l
Standard equipment included:
• Fully automatic microprocessor control with 12 programs:
Individual program parameters such as temperature and time can be selected and stored for each program.
Program 1-3: Quick program for solids, instruments, equipment, plastic items with rapid steam discharge
Program 4-5: For waste in destruction bags with pulsating heating phase for improved air removal from destruction bags
Program 6-7: For destruction sterilization of liquids with slow steam discharge. (Or rapid cooling as option)
Program 8-11: For liquids with subsequent controlled steam discharge and self-cooling (Or rapid cooling as option)
Program 12: Cleaning program with rapid steam discharge
Validation, Documentation:
A validation port 1/2" is available for the introduction of external temperature sensors for validation purposes. For documentation of program sequences, various optional systems are available ranging from built-in printer to PC software via RS 232 interface or separate data loggers for GMP-compliant documentation.
• Steam generation by heating elements in the chamber (no separate steam generator)
• Sterilization temperature up to 140°C, steam pressure up to 4 bar
• Mechanical safety locking system with lip seal
• Thermal barrier, pressure and media temperature controlled, temperature-dependent door lock in accordance with DIN and TRB
• Pressure vessel made of titanium-stabilized chrome-molybdenum stainless steel 1.4571 (V4A) AISI 316 Ti, electropolished, chemically resistant, easy to clean
• Flexible PT-100 temperature sensor for reference vessel
• Media temperature sterilization time trigger
• Electronic pressure transducer for pressure and temperature control
• Exhaust steam condensation water-cooled thermostatically controlled
• Autofill, automatic deionized water feed-in for steam generation
• Special program for destruction sterilization with pulsating heating phase for improved air removal from destruction bags
• Start by Clock/Timer for programmable start time
• RS 232 interface for external data transfer
• Prepared for printer connection (for subsequent installation)
• Prepared for rapid cooling (for subsequent installation)
• Manifold connection for all outlet lines
• Drain valve
• Bottom plate for placement of vessels, baskets, etc.
• Validation port
• Low water level protection
• Thermal insulation made of Hanno-Tect, therefore no risk of particle shedding
• Support frame and housing also made of stainless steel
• Safety valve for pressure relief when limit values are exceeded
• Overtemperature protection
External dimensions: 550 x 780 x 1085 mm (W x D x H)
Net weight: 140 kg
Heating capacity: 9.3 kW
Voltage: 380 - 400 V
Permissible operating pressure: 4 bar absolute
Permissible operating temperature: 140°C
Building-side media connections:
Electrical connection: 380-400 V, 50/60 Hz, 16 A
Demineralized water: Ball valve 3/4" for hose connection (only for fixed connection, water can also be supplied from a storage tank)
Raw water: Ball valve 3/4" for hose connection (for exhaust steam condensation, device can also be operated without this)
Drain: Hose connection 3/4" max. 500 mm from floor or floor drain
Warranty: One year from delivery for material and manufacturing defects
3 years on heating elements
5 years on pressure vessels and locking mechanisms
